Installing bathroom mirrors can be asignificant job. Everyone has to see their looks like before going out in the world. Women need to see well to put their make-up on, and the guys need to understandto shave. Hanging the mirror just isn’t difficult unless you possess a large mirror. Then you may need some help lifting directly into place or holding because you mark for the hangers. You will find two types regarding mirrors, framed and frameless. They need different methods to hold, so first you must know what kind of mirror you will hang.
Things You’ll Require
- J clips for any framEless bathroom mirror
- The Wire and screw kit for a framed mirror
- Stud finder of the bird
- Safety glasses
- Tape measure
- Dry get rid of marker
Hang a Frameless Hand mirror
Take the Measurement your bathroom wall and locate the center. Mark the midpoint on the wall above the wall with a pencil. Measure the mirror and find the center. Mark the biggest market of the mirror on top with a simple gets rid of marker. Hold the bathroom mirror up to the wall and location it by matching up the middles.
Using a stud finder of the bird, locate two studs behind the drywall in which the bathroom mirrors is going. Scratch them with a pencil, and using a quantity, draw a line between them so one of these will hold the reflection level.
Attach the bottom two J-clips to the wall at your marks with flathead wood anchoring screws 1/1/2 to 2’’long. Attach the two top commentator pieces to the wall just below your line you marked on the surface of the mirror. Slip the top a pair of J-clips loosely in the anchors.
Place the mirror on the J clips at the end and hold against your wall. Shove the top two clips depressed, so the lip goes over the edge from the bathroom mirrors. They will lock into place when you push them down.
Hanging a Framed Mirror
Screw eye screws in the back of the reflection frame on each side about 1/3 from the way from the best. Using the perfect mirror hanging wire to the weight of your thought, wrap the wire using one eye screw, wrap it back across the wire and knot. Leave some loose so the wire bows a touch and attaches in the same manner conversely. Check out this link for more info:http://www.diynetwork.com/how-to/rooms-and-spaces/bathroom/how-to-install-a-bathroom-mirror
Find the center around your vanity and mark on the wall with a pencil. Using a stud finder of the bird, know if there exists a stud there. Use a hollow wall membrane anchor or molly bolt to hold on to the bathroom mirrors. If it’s a stud, you will just require a screw. Lay the mirror lower and pull the wire up from the center. Measure from the lowestof the frame up to the surface of the center of the cable. Use this size to know where to place your nail or bolt on the wall and then toenail it in.
Hang the mirror on the nail or pin. If the mirror is massive, you can install two nails on the wall, with one being in a very stud. Just make sure each nailis level or your bathroom mirrors will hold crooked.